• Design Of Slot Array Antenna In Groove Gap Waveguide Technology
• Waveguide Slot Array Antenna Design
• Slot Array Antenna Designs

A slot antenna consists of a metal surface, usually a flat plate, with one or more holes or slots cut out. When the plate is driven as an antenna by an applied radio frequency current, the slot radiates electromagnetic waves in a way similar to a dipole antenna. The shape and size of the slot, as well as the driving frequency, determine the radiation pattern. Slot antennas are usually used at UHF and microwave frequencies at which wavelengths are small enough that the plate and slot are conveniently small. At these frequencies, the radio waves are often conducted by a waveguide, and the antenna consists of slots in the waveguide; this is called a slotted waveguide antenna. Multiple slots act as a directivearray antenna and can emit a narrow fan-shaped beam of microwaves. They are used in standard laboratory microwave sources used for research, UHF television transmitting antennas, antennas on missiles and aircraft, sector antennas for cellular base stations, and particularly marine radar antennas. A slot antenna's main advantages are its size, design simplicity, and convenient adaptation to mass production using either waveguide or PC board technology.

Slot antennas are designed to work like a resonant radiator. This principle likens the slot antenna to a dipole. The main difference is that a dipole antenna has vertical and horizontal fields whereas a slot antenna has a rotated polarization. Pros of Slot Antennas.

Structure[edit]

1. This paper discusses the design, analysis, and development of waveguide-fed planar slot arrays to achieve low-average-sidelobe specifications, as may arise in radiometer applications. Such antennas may be required to meet strict average sidelobe levels in different angular regions, and low average return loss over a specified bandwidth.
2. Read 5 answers by scientists with 1 recommendation from their colleagues to the question asked by Arash Arsanjani on May 6, 2019.
3. If the waveguide slot antenna is designed in this manner, then all of the slots can be viewed as being in parallel. Hence, the input admittance and input impedance for an N element slotted array can be quickly calculated: The input impedance of the waveguide is a function of the slot impedance.

As shown by H. G. Booker in 1946, from Babinet's principle in optics a slot in a metal plate or waveguide has the same radiation pattern as a driven rod antenna whose rod is the same shape as the slot, with the exception that the electric field and magnetic field directions are interchanged; the antenna is a magnetic dipole instead of an electric dipole; the magnetic field is parallel to the long axis of the slot and the electric field is perpendicular. Thus the radiation pattern of a slot can be calculated by the same well-known equations used for rod element antennas like the dipole. The waves are linearly polarized perpendicular to the slot axis. Slots up to a wavelength long have a single main lobe with maximum radiation perpendicular to the surface.

Antennas consisting of multiple parallel slots in a waveguide are widely used array antennas. They have a radiation pattern similar to a corresponding linear array of dipole antennas, with the exception that the slot can only radiate into the space on one side of the waveguide surface, 180° of the surrounding space. There are two widely used types:

Design Of Slot Array Antenna In Groove Gap Waveguide Technology

• Longitudinal slotted waveguide antenna - The slots' axis is parallel to the axis of the waveguide. This has a radiation pattern similar to a collinear dipole antenna, and is usually mounted vertically. The radiation pattern is almost omnidirectional in the horizontal plane perpendicular to the antenna over the 180° azimuth in front of the slot, but narrow in the vertical plane, with the vertical gain increasing approximately 3 dB with each doubling of the number of slots. The radiation is horizontally polarized. It is used for vertical omnidirectional transmitting antennas for UHF television stations. For broadcasting, a cylindrical or semicircular waveguide is sometimes used with several columns of slots cut in different sides to give an omnidirectional 360° radiation pattern.
• Transverse slotted waveguide antenna - The slots are almost perpendicular to the axis of the waveguide but skewed at a small angle, with alternate slots skewed at opposite angles. This radiates a dipole pattern in the plane perpendicular to the antenna, and a very sharp beam in the plane of the antenna. Its largest use is for microwave marine radar antennas. The antenna is mounted horizontally on a mechanical drive that rotates the antenna about a vertical axis, scanning the antenna's vertical fan-shaped beam 360° around the water surface surrounding the ship out to the horizon with each revolution. The wide vertical spread of the beam ensures that even in bad weather when the ship and the antenna axis is being rocked over a wide angle by waves the radar beam will not miss the surface.

History[edit]

The slot antenna was invented in 1938 by Alan Blumlein, while working for EMI. He invented it in order to produce a practical type of antenna for VHF television broadcasting that would have horizontal polarization, an omnidirectional horizontal radiation pattern and a narrow vertical radiation pattern.^[1][2]

Prior to its use in surface search radar, such systems used a parabolic segment reflector, or 'cheese antenna'. The slotted waveguide antenna was the result of collaborative radar research carried on by McGill University and the National Research Council of Canada during World War II.^[3] The co-inventors, W.H. Watson and E.W. Guptill of McGill, were granted a United States patent for the device, described as a 'directive antenna for microwaves', in 1951.^[4]

Other uses[edit]

In a related application, so-called leaky waveguides are also used in the determination of railcar positions in certain rapid transit applications. They are used primarily to determine the precise position of the train when it is being brought to a halt at a station, so that the doorway positions will align correctly with queuing points on the platform or with a second set of safety doors should such be provided.

See also[edit]

• Microwave Radiometer (Juno) (has a slot array antenna)
• RIMFAX (radar for Mars rover has slot antenna design)

References[edit]

1. ^Blumlein, Alan (1938-03-07), 'Improvements in or relating to high frequency electrical conductors or radiators', British patent no. 515684
2. ^Burns, Russell (2000). The life and times of A.D. Blumlein. Institution of Engineering and Technology. ISBN0-85296-773-X.
3. ^Covington, Arthur E. (1991). 'Some recollections of the radio and electrical engineering division of the National Research Council of Canada, 1946-1977'. Scientia Canadensis: Canadian Journal of the HIstory of Science, Technology and Medicine. 15 (2): 155–175. doi:10.7202/800334ar.
4. ^Watson, William Heriot; Guptill, Ernest Wilmot (6 November 1951), Directive Antenna for Microwaves, retrieved 20 December 2016

External links[edit]

Waveguide Slot Array Antenna Design

• 'Slot Antennas'. Antenna Theory.
• Slotted Waveguide Antennas Antenna-Theory.com

Slot Array Antenna Designs

Slotted antennas, a complement to dipole antennas, have slots a λ/2 long and a fraction of a wavelength wide. The antenna propagates based on Babinet’s principle of a resonant radiator. The key difference between a dipole and a slotted antenna is the field components are interchanged in orientation. Because of the vertical electric field in horizontal orientation, slot arrays can fit on the surface of moving objects without introducing much aerodynamic drag and wind load. For the same size, slotted waveguide array antennas are more efficient than any other planar antenna. Versatility in slot feeding options, ease of weather-proofing and mechanical stability make slotted antennas well-suited for military and defense applications.

For radar and communication systems, Eravant, formerly SAGE Millimeter, has developed the SAW-3533532716-28-L2-WR, a slotted waveguide array antenna operating at 35 GHz with 500 MHz bandwidth. The bandwidth can be increased by increasing the slot width, with cross-polarization increasing as a trade-off. The SAW-3533532716-28-L2-WR slot array supports linear, vertically polarized signals with high aperture efficiency and low VSWR. The antenna has 27 dBi gain with a half-power beamwidth of 16 degrees in the E-plane and 2 degrees in the H-plane. A radome of LEXAN polycarbonate makes the antenna suitable for outdoor applications. Its 1 lb. weight and small size - measuring 11.84 in. x 3.85 in. and just 0.93 in. thick - eases mounting and minimizes the dynamic load to the overall structure. A groove for an O-ring in the standard WR28 waveguide flange (UG-599/U) pressure seals the connecting interface. Integrating the antenna with a T/R diplexer, a dual channel I/Q receiver and an oscillator makes a complete package for many system applications, such as traffic management, law enforcement, communications and military surveillance.

The slot array antennas offered by Eravant span WR90 to WR10 and are designed with MIL-F-3922 designated standard flanges as the microwave connector interface.

Eravant, formerly
SAGE Millimeter
Torrance, Calif.
www.eravant.com